無論是國產秤還是進口秤,無論款式、精度、質量,十萬分之一天平的基本結構都是一樣的,都是由秤盤、傳感器、位置檢測器、PID調節器、功率放大器、低通濾波器、模數轉換器、微電腦、顯示器、外殼、支腳等部分組成。
十萬分之一天平核心構造主要有這些。
1、傳感器
傳感器是天平的關鍵部件之一,由外殼、磁鋼、極靴和線圈等組成,安裝在秤盤下方。十萬分之一的天平非常精確和靈敏。天平的稱重室應保持清潔,稱重時傳感器的正常工作不應受到散落物體的影響。
2、位置檢測器
位置探測器由高靈敏度遠紅外發光管和對稱的光敏元件組成。它的作用是將秤盤上的載荷轉換成電信號輸出。
3、PID調節器
PID(比例積分微分)調節器的作用是保證傳感器快速穩定的工作。
4、功率放大器
它的作用是放大微弱的信號,從而保證十萬秤的精度和工作要求。
5、低通濾波器
它的作用是消除外界和一些電氣元件的高頻信號的干擾,從而保證傳感器的輸出是一個恒定的DC電壓。
6、模擬數字(A/D)轉換器
十萬分之一天平優點是轉換精度高,易于自動調零,有效消除干擾,將輸入信號轉換成數字信號。
天平在正式稱重前,需要至少預熱2個小時,使儀器內的線路和元件都達到穩定狀態,才可以使用。平時天平可一直保持通電,使天平處于待機狀態,這樣可使天平一直保溫,減少預熱時間,提升工作效率。定期清潔天平,用細軟布擦拭天平表面,注意不要使用有腐蝕性的清潔溶液,清潔后要及時擦干。建議每月至少對天平做一次維護保養,對天平進行校準并檢查天平的各項功能是否正常。