電子天平是實驗室常用的測量工具,隨著科學技術的發展和科學實驗要求的日益精密,電子天平的精度越來越高?,F在千分之一、千分之一精度的秤很常見,很多實驗室甚至配備了更精密的電子秤,精度達到千分之一、
十萬分之一天平。
實際上,從形式上來說,天平的準確度應該用實際分度值D和檢定分度值e來表示,但在日常應用中,為了便于交流和理解,人們通常習慣于將天平的準確度簡稱為百分之一、千分之一和萬分之一。你可以這么通俗的理解,百分之一精度的天平是最小讀數為0.01g即1/100g的天平,千分之一精度的天平最小讀數為0.001g即1mg;萬分之一的天平最小讀數為0.1mg;十分之一刻度的最小讀數為0.01毫克。
天平的精度越高,對稱重環境和操作程序的要求就越嚴格。那么日常使用中使用精度達到十萬分之一時需要注意什么呢?
十萬分之一天平不像傳統的電子天平,傳感器放在秤盤的底部,這種天平的傳感器放在后面。這是因為高靈敏度、高穩定性的傳感器需要更復雜的電路設計,所以需要更大的空間。同時后置傳感器可以更大程度的避免秤盤震動的影響,所以可以有更高的靈敏度。此外,這款1/10萬秤的顯示部分和稱重部分也可以拆分,這種拆分設計也可以將操作震動帶來的影響降低。
使用時,1/10萬比例尺對環境要求非常嚴格,需要放在牢固穩定的桌子上。平衡室內的溫度和濕度應在標稱范圍內,避免強對流空氣、振動源和陽光直射。稱重時應戴防靜電棉手套,每次稱重必須及時關閉防風罩,讀數前天平讀數應穩定。
此外,十萬分之一天平在稱重前,1/10萬秤需要預熱至少2小時,使儀器中的電路和元件達到穩定狀態后才能使用。平時可以一直給天平通電,使天平處于待機狀態,這樣可以給天平保溫,減少預熱時間,提高工作效率。
定期清潔天平,用軟布擦拭天平表面,注意不要使用腐蝕性清洗液,清洗后及時擦干。建議每月至少維護一次天平,校準天平并檢查天平的所有功能是否正常。