不同精度的的實驗室電子天平都能用來做什么?
1、準確率更低,做工藝準備測試。
2、千分之一,做工藝性測試。
3、萬分之一,做以上測試和化學分析測試。
4、十萬分之一,做儀器分析。
5、精度更高,百萬分之一,用于儀器分析。
對于實驗室電子天平的選購,怎樣才能買到性?xún)r(jià)比高的天平?下面詳細介紹一下性能良好的天平的檢測方法。
1、穩定性:穩定性可分為長期穩定性和瞬時穩定性。長期穩定是指電子天平在環境溫度下變化很小,瞬時穩定是指被測物體放在上面后,天平顯示的數值立即顯示并保持不變。通電后,同一補充供試品在不同時間段的重量變化差異會(huì )保持較長時間。上述參數之差越小,電子天平的性能越穩定。
2、線性精度:線性也是衡量電子天平的一個非常重要的指標,主要是指在整個稱量范圍內,顯示值與絕對值之間的偏差。即使經過滿量程校準,也很難在質量差的電子天平的稱重范圍內獲得準確的稱重值。
3、重復性:重復性是衡量電子天平的另一個重要指標。如果重復性不好,收集的數據就不可靠。重復性主要是指電子秤,反復多次稱重,數值的波動。
4、靈敏度:實驗室電子天平靈敏度是指分辨率和分辨率所反映的時限。指分辨率驗證分度值E或顯示分辨率d,數值越小越好(高靈敏度)。反映時間限制,電子秤增加一個靈敏度的數值所需要的時間越短越好。我們認為電子天平反應快,靈敏度高。